User Tools

Site Tools


start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
start [2011/12/01 11:34]
whitet
start [2018/10/15 20:47] (current)
pfeutim old revision restored (2017/04/23 13:01)
Line 4: Line 4:
 ===== Tom's Wiring Loom ===== ===== Tom's Wiring Loom =====
  
-The __**[[following wiring]]**__ info is based on my Caterham 7 VVC from 1999. It is equipped with a EU2 Rover MEMS ECU. As usual with these things, I started out intending to make a simple wiring document but got a bit carried away and added links and photos of the connectros and made schematics of the under bonnet measurement chains.+The [[following_wiring|Main Schematic Page]] info is based on my Caterham 7 VVC from 1999. It is equipped with a EU2 Rover MEMS ECU. As usual with these things, I started out intending to make a simple wiring document but got a bit carried away and added links and photos of the connectros and made schematics of the under bonnet measurement chains.
 As found no convention on the pin out numbering (Caterham wiring diagram doesn'​t match the few connectors that are market at pin 1). I took photos of the back of the connectors and market pin numbers as a schematic. As found no convention on the pin out numbering (Caterham wiring diagram doesn'​t match the few connectors that are market at pin 1). I took photos of the back of the connectors and market pin numbers as a schematic.
  
start.1322735658.txt.gz ยท Last modified: 2011/12/01 11:34 by whitet